- The filling holes are located under the label as shown. Just peel back the label leaving it still connected to the cartridge, do not remove completely.
- Use the provided eyelet screw to widen the filling hole(s) in the top of the cartridge(s).
- Connect the needle to the syringe and fill with ink.
- Insert the needle into the widen filling hole. Note: This cartridge has a sponge so you may feel a slight pressure. Inject about 10 ml. of ink, per color until the ink bubbles up.
- Pull the label back into place and use a piece of tape to hold it in place.
- Rinse the syringe with water and dry between each color refill or store for future use.
- Reinsert cartridge back into the printer and run 1 - 3 cleaning cycles as per printer instructions
Subscribe to:
Post Comments (Atom)
0 Response to "REFILL INK CARTRIDGES CANON BCI-60, BCI-61, BCI-62"
Post a Comment